Learning how to backside 180 on a Tech Deck is the best way to add your first blind spin trick after the frontside 180. This guide shows you the finger placement, the wind up, the spin, the catch, and a 10 minute drill. You will also fix the three mistakes that stop most beginners and see what to learn next.
Your frontside 180 is landing, and now you want a spin that turns the other way. Learning how to backside 180 on a Tech Deck is the natural next step. The board jumps, spins halfway around with your back to the turn, and lands facing the other way. It feels strange, because you cannot see the board through the whole spin, and it opens the door to 360s, boardslides, and every blind trick after it.
The hard part is the blind landing. You have to wind up your shoulders, pop, spin, and catch, all in less than a second. That sounds fast, but each part is simple on its own. The good news is that you can learn it on a desk in a small space. You do not need a ramp, a rail, or a skatepark. In this guide you will learn the finger placement, the five steps, the three mistakes to avoid, and a 10 minute drill.
What Is a Backside 180 on a Tech Deck?
A backside 180 is a spin trick where the board jumps, turns 180 degrees, and lands facing the opposite way. Your back faces the direction of the spin, which is what makes it backside, and you land without seeing the board through the whole turn.

The name comes from real skateboarding. Backside means your back faces the direction of the spin, so the board turns away from your chest. On a Tech Deck your fingers play the role of your feet, and your hand turns with the board as it spins.
A backside 180 is one of the first blind spin tricks most riders learn after the frontside 180. It looks harder than it is, because the blind landing feels strange at first. Most beginners who can already frontside 180 land a backside 180 within two to three weeks.
Backside means your back faces the spin, so you cannot watch the board through the whole turn. The opposite trick is the frontside 180, where your chest faces the spin and the landing is easy to see. Most riders learn the frontside version first because it is easier to see and control.
What Is the Difference Between a Backside 180 and a Frontside 180?
The difference is which way your body faces during the spin. In a frontside 180 your chest faces the spin, and in a backside 180 your back faces the spin. The pop is the same, but the wind up and the landing feel different.

That switch changes the feel of the whole trick. In a frontside 180 you can watch the board turn and time your catch by sight. In a backside 180 the board turns away from you, so you have to feel the spin and trust your fingers to catch it.
Here is a simple way to think about it. A frontside 180 is a turn you can see. A backside 180 is a turn you have to feel. Both use the same pop and the same wind up, so once you learn one, the other is just a new direction to practise.
If you have not learned the frontside 180 yet, start with our guide on How to Frontside 180 on a Tech Deck, then come back here. If you are still choosing a board, read our guide to the best Tech Deck to buy in 2026 first.
What Do You Need Before You Learn a Backside 180?
You should be able to ollie cleanly and land a frontside 180 before you learn a backside 180. You do not need a perfect frontside 180, but you need to know what a spin feels like, and you need to be comfortable catching the board in the air.

- A flat, hard surface. A desk or table is ideal. The board needs to pop and spin freely without catching on carpet or cloth.
- A Tech Deck with free-spinning wheels. If a wheel drags, the board will not spin cleanly and the landing will pull to one side.
- Grip tape with some grip left. Your fingers need to grip the board to turn it. Worn, smooth grip makes the spin slip.
- A little space. The board spins in place, so you do not need a long run-up. Clear the area around it, about 30 cm on each side.
One more thing helps a lot. Practise with your shoulders loose. The spin starts in your shoulders and your hand, not in your fingers alone. If your shoulders are stiff, the spin will be stiff too.
Where Do Your Fingers Go for a Backside 180?
Finger placement for a backside 180 is close to frontside 180 placement, with one important change. Your back finger moves to the edge of the tail so it can twist the board the other way, and your front finger stays near the middle to guide the spin.

Step 1: Put Your Middle Finger on the Tail Edge
Place your middle finger on the tail, toward the back edge and slightly to one side. Your fingertip should sit near the corner of the tail, not in the centre. This finger pops the tail and starts the spin, so it needs a spot where it can push and twist.
Step 2: Put Your Index Finger Near the Middle
Place your index finger near the middle of the board, just behind the front bolts. This finger stays light. Its job is to guide the board and catch it after the spin, not to push it. If it presses too hard, it will stop the spin.
Step 3: Wind Up Your Hand the Other Way
Turn your hand a little in the opposite direction from a frontside 180 before you pop, like winding up a spring the other way. A small wind up is enough. Your hand should turn back about 30 degrees, no more. This stores the spin, so the board turns easily when you release it.
Quick test: wind up and pop the tail lightly without landing. If the board starts to turn away from your front, your placement is right.
How Do You Backside 180 on a Tech Deck Step by Step?
Here is a simple 5 step process to land your first backside 180. Each step builds on the last one, so practise them in order. Take your time with the spin, because rushing it makes the board wobble.

Step 1: Set Your Fingers and Wind Up
Set your fingers in the position above and wind your hand up a little in the backside direction. Learn it from a standstill, not rolling, so you can feel the spin without chasing the board. Keep the board flat and your fingers light.
Step 2: Pop the Tail
Pop the tail with your middle finger, the same as an ollie. Push down sharply and let the board rise. The pop gives the board the height it needs to spin, so make it clean and strong.
Tip: the pop and the spin happen together, not one after the other. Pop the tail and unwind your hand in the same moment, like one movement.
Step 3: Turn Your Hand and the Board
As the board rises, unwind your hand toward your back and let the board turn with it. Your middle finger twists the tail, and your index finger guides the nose around. The board should turn smoothly, not in a jerk.
Step 4: Feel for the 180 Degree Turn
Feel the board spin until it has turned halfway around, 180 degrees, and the nose and tail have swapped places. Do not try to catch it early. Let it complete the turn, and keep your hand close to the board the whole time.
Step 5: Catch and Land on All Four Wheels
As the board completes the spin, bring both fingers down over the bolts and catch it. Land on all four wheels at the same time, then roll forward in the new direction. To make it smoother, catch it a fraction earlier each time, until the landing feels soft.
What Are the Most Common Backside 180 Mistakes?
Most backside 180 problems come from three mistakes. Fix them one at a time, and the trick gets much easier.

- Not winding up enough. The board only turns 90 degrees and stops. Fix it by winding your hand up a little more before the pop, and by turning your shoulders with your hand. A bigger wind up gives a fuller spin.
- Popping without spinning. The board jumps straight up and lands facing the same way. Fix it by popping and unwinding in the same moment. If you pop first and spin second, the board is already falling before it turns.
- Catching too early. You grab the board halfway through the spin and it lands sideways. Fix it by waiting for the full turn. Feel for the nose and tail swapping places, then bring your fingers down.
One more mistake is common. Riders spin the board with their fingers only, and the turn is weak. Use your whole hand and your wrist, not just your fingertips. The spin comes from the hand, and the fingers only guide it.
If your board keeps landing on two wheels, your catch is uneven. Bring both fingers down at the same time, over the bolts, and the landing will level out.
How Can You Practise the Backside 180 in 10 Minutes a Day?
A short daily drill works better than a long session once a week. Your hand learns the spin by repeating it, and ten minutes a day is enough to build it in a few weeks.

First, spend two minutes on the wind up alone. Wind up and unwind without popping. This teaches your hand the motion and keeps it smooth.
Second, spend five minutes on slow spins. Pop gently and turn the board slowly, without worrying about the landing. Just feel the spin and learn the timing. Slow spins teach your hand more than fast ones.
Third, spend three minutes on full tries. Pop, spin, and catch. Count how many you land out of ten, and write the number down. Most riders land one in ten in the first week, and three in ten by the third week.
Practise at the same time each day if you can. Your hand remembers the motion better with a regular routine. And take a break if your wrist gets tired. A tired wrist makes sloppy spins, and sloppy spins teach bad habits.
What Are the Advantages and Disadvantages of the Backside 180?
A backside 180 is a great next trick after the frontside 180, but it is not perfect for everyone. Here is an honest look at both sides before you start. Knowing both sides helps you practise with the right expectations.

Advantages
- It completes your spin trick set. A frontside 180 spins one way and a backside 180 spins the other, so learning both means you can turn the board in either direction whenever you want.
- It teaches you to feel the board. The blind landing forces you to trust your fingers instead of your eyes, and that feel carries into grinds, slides, and flip tricks.
- It opens up bigger tricks. The wind up and timing you build here show up again in 360s, boardslides, and flip tricks. The work you put in now pays off fast when you move on.
Disadvantages
- The blind landing takes time to learn. Most beginners need two to three weeks of daily practice before the spin and the catch feel smooth together. Slow, clean tries in the first week fix this faster than rushing.
- It is easy to catch too early. Grabbing the board halfway through the spin lands it sideways, and that habit is hard to break once it sets in. Wait for the full turn before you bring your fingers down.
- It needs a clean frontside 180 first. If your frontside 180 is shaky, the backside spin will be shaky too, so you have to fix the frontside 180 before this trick works. Spend a few days on it if the spin keeps falling apart.
What Should You Learn After the Backside 180?
A clean backside 180 opens up a whole set of spin tricks. The wind up and the timing you build here show up again in 360s, boardslides, and flip tricks, all of which use the same spin.

- Backside 360. The full turn, twice as far as the 180. It needs a bigger wind up and a stronger pop, so learn the 180 first.
- Boardslide. The spin trick that pairs well with a backside 180, because the landing often flows straight into a slide on a rail or an edge.
- Kickflip. The flip trick that pairs well with a 180, because the landing often flows straight into a flip. Read our guide on How to Kickflip on a Tech Deck when you are ready.
The best next step is to link the backside 180 with a trick you already know. Ollie into a backside 180, then roll into a manual. That combo looks smooth, it shows real control, and it is a favourite in fingerboard videos.
For the full list of tricks in order, see our pillar guide to Tech Deck tricks.
What Do Beginners Ask About the Backside 180?
Here are the questions beginners ask most about the backside 180. Each answer is short and direct, so you can find your fix fast.
Is a backside 180 harder than a frontside 180?
For most people, yes at first. The backside 180 adds a blind landing, while the frontside 180 lets you watch the board through the whole turn. But the pop is the same, so riders who can frontside 180 usually land a backside 180 within two to three weeks of practice.
How long does it take to learn how to backside 180 on a Tech Deck?
Most beginners who can already frontside 180 land their first backside 180 within two to three weeks. A clean backside 180, with a full spin and a flat four wheel landing, usually takes three to four weeks of ten minute daily practice.
Why does my board only spin 90 degrees?
Your wind up is too small, or you are spinning with your fingers only. Wind your hand up more before the pop, and turn your wrist with your hand. A bigger wind up gives a fuller spin, and the board will turn the full 180 degrees.
Should I learn a backside 180 rolling or standing still?
Learn it standing still first. The spin is easier to feel and catch when the board is not moving forward, and you can focus on the wind up alone. Once you can land it still five times in a row, try it with a slow roll.
What is the difference between a backside 180 and a frontside 180?
A backside 180 turns away from your front, with your back facing the spin. A frontside 180 turns toward your front, with your chest facing the spin. The frontside version is easier to see and control, so most riders learn it first.
Why does my board land sideways?
You are catching it too early, before the spin is done, or your fingers are coming down unevenly. Wait for the full turn, feel the nose and tail swap places, then bring both fingers down at the same time over the bolts.
Do I need to frontside 180 first to learn how to backside 180 on a Tech Deck?
Yes, you should be able to frontside 180 cleanly first. The backside 180 is a frontside 180 plus a blind landing, so the spin has to be automatic before you add the blind catch. If you cannot frontside 180 yet, spend a few days on it, then come back here.
Can I do a backside 180 on any Tech Deck?
Yes, any standard Tech Deck works. A board with free spinning wheels and decent grip tape is best. If a wheel drags or the grip is smooth, the spin will be harder. Fix the setup first, then practise the trick.
Conclusion
So, in this article, we covered how to backside 180 on a tech deck in detail. You learned the finger placement, the wind up, the five steps, the three mistakes that stop most beginners, and a 10 minute drill that builds the trick day by day. You also saw what to learn next.
Here is my honest advice. Do not chase a fast spin in your first week. Spend ten minutes a day on slow, clean backside 180s, and the speed will come on its own. Your hand is learning a new motion, so give it time and keep the practice slow and steady.
Now go practise your backside 180 for ten minutes and try to land three clean ones in a row. Once you can do that, try linking an ollie into a backside 180 and rolling into a manual.
TechDeckTrick.com is an independent guide and is not affiliated with or endorsed by Tech Deck or Spin Master.
